Thermoplastic Road Marking Paint Machine Cold Paint Road Marking Machine Road Line Marking Machine Traders
Product Description:
Road marking machine is a kind of device specially used to delineate diverse traffic lines on blacktop or concrete surface in order to offer guidance and information to motorists and pedestrians.
Regulation for parking and stopping can also be indicated by the traffic lanes. Line marking machines conduct their work through screening, extruding, and spraying thermoplastic paints or cold solvent paints on to the pavement surface.
Jinan Junda Industrial technology CO.,LTD specializes in road marking machine, including the hot melt road machine and cold paint road marking machine.Mainly used for marking urban roads and expressways, factory buildings, parking lots, garages, plazas and airport runways, sports playground.
Pavement construction machinery with different restrictions, guidelines and warnings on the level ground is delineated.
Road marking machine, herein means the aggregate of hand-push type machine, self-propelled type machine, sitting type machine, thermoplastic type machine and cold painting type machine, which is used to mark lines on road. It is mainly used in car parks, avenues, streets, highway, etc. contributing to improve the convenience and safety of driving and walking.
Product classification:
Based on the different driving modes, which is also a typical classification principle, all the pavement stripe markers can be categorized into hand-push type(also called walk behind stripping machines), self-propelled type, driving-type, and truck-mounted type.
Based on the marking paint applied on paved roadways, all the road marking machines could fall into two major sorts, thermoplastic paint pavement marking machines and cold paint airless pavement marking machines.
1.Thermoplastic pavement marking machine:
Thermoplastic pavement marking machine is a low-pressure air spraying machine with high-efficiency and flexibility. It can serve long distance and continuous line marking work. The spray thickness is adjustable and not effected by the old marking line.
A hot melt kettle inside the machine plays a vital role in heating, melting, and stirring thermoplastic marking paints. The coating only needs a few minutes to harden after cooling fast from 200ºC. Thermoplastic paints can be produced in any colour, but when it comes to the road marking, yellow and white are the most common colors
Thermoplastic tank:double stainless steel heating insulation barrels, capacity 100kg, plug-in manually mixer devices, removable devices.
Product features:
* Glass bead container: 10kg/box
* Glass beads dispensier: synchronous cluth spead with speed gearshift device.
* Marking equipment: 150mm marking shoe(high -precision ultra-thin material manufacturering, scraper-type structure)
* Knife underframe: carbide with eccentric sleeve device can adjust
* Tire:alloy wheel,a special heat-resistant rubber
* Rear wheel directional device:ensuring the machine moving in straight line or turning freely in curved road.
* Marking width: 100mm, 150mm, 200mm, 250mm, 300mm, 400mm, 450mm at customers' option
2.Cold paint or cold plastic airless pavement marking machine:
Cold paint or cold plastic airless pavement marking machine is a kind of airless cold and tow-component machine. Large capacity paint tank and glass beads bin make it suitable for long distance and continuous marking work. Cold solvent blacktop marking paint is made of modified acrylic resins, pigment filling and additive, generally used in city roads and common roads consisted of asphalt pavement and concrete road surface; it has excellent weather resistance, high toughness, strong wear resistance and adhesion, and it is not easy to peel off. The called cold here actually refers to the normal temperature, without a physical cooling course involved in. So, since no heating and melting course is needed, this kind of road marking machine, whether it's driving-type or truck-mounted, enjoys much more efficiency.
| |
Single gun |
Double gun |
| Model |
JD-6L |
JD-8L |
| Motor power |
4.3HP |
7HP |
| Unloading flow |
6L/min |
8L/min |
| Max output pressure |
25mpa |
30mpa |
| High pressure pipe strength |
35mpa |
40mpa |
| High pressure pipe length |
6*10m |
6*2m10*10m |
| Max spray width |
200mm |
450mm |
| Weight |
72kg |
128kg |
3.Two-component line marking machine:
Two-component line marking machineis a high-end marking equipment that has emerged in recent years. Unlike thermoplastic marking facility and cold paint airless pavement marking equipment which coat the road with paint film through physical drying methods such as temperature drop or solvent volatilization, the two-component marking is a new type of striping device that forms a coating film by internal chemical cross-linking.
Based on the purposes of usage, in a broad sense, road line removal machines should be included in this scope. As opposed to the pavement striping devices, road line removal machines are specialized for clearing away the broken, stained and wrong marking lines. Removing existing road striping or pavement markings is a real challenge.
It's not easy to remove the traffic markings without causing damage to or scar the road surface. Built-in powerful cutter or grinder is the best method for removing traffic paint, thermoplastic, epoxy coatings and other materials. With the depth adjuster device, the removal machines can accurately adjust and fix depth according to the needs.
Road striping pre-heater, a specialized auxiliary machine, is matched with thermoplastic road marking machine. Its function lies in heating and melting thermoplastic paint, helps saving fuel energy and heating time, and improves the efficiency.
Product Components:
A pavement marking machine is normally composed of engine, air compressor, paint bucket(kettle for heating and melting paint), spray gun, guide rod, controller, die shoe, dispenser and other devices. Driving carrier to provide power is also a must.
Engine:Most of roadway striping equipment adopt engine as the driving force, while some use battery or liquefied gas. The power range of the appliable engines is about 2.5HP to 20HP. Generally speaking, the better the engine, the better the performance of entire marker device. If adopting the battery as the driving force, the running time each charge shall not be less than 7 hours.
Air Compressor:Air compressor is also one of the main parts that affect the performance for the whole line marking machine, especially for those conducting spraying by air pressure. Overall, The bigger the emission of air compressor, the better the performance of marking equipment.
Paint Bucket:In terms of line making machine, the paint bucket has two main functions. One is to carry the molten paint; the size of its capacity will affect the progress of operation. The other function is as a pressure vessel, which can become the driving force of the striping work. In this sense, the sealing, safety, corrosion resistance are the important properties that the user should be concerned.
Spray Gun:Using the hand-held spray gun not only allows you to freely use the template to paint various symbols, but also can work on walls, columns and other places other than the ground. Hand-held spray guns have gradually become the standard configuration of various marking equipment.
Cleaner:Some strip marking devices are equipped with an automatic cleaner, which can quickly clean the pipeline system after each end of work, your cleaning work can therefore save more than half of the time.
Glass Bead Spreader:The road maintenance company should also consider configuring the glass bead spreader as a standard configuration. The spreader can spray glass beads to make the marking construction fully meet the higher requirements.
Glass bead, a kind of colorless and transparent ball, has function of light refraction. Glass bead mixed in the coating or dispensed throughout the coating surface can reflect car light back to the driver's eyes, thus greatly improving the visibility of marking lines. The headlights flash on such marking lines can reflex back in parallel, so the driver could see the forward way clearly and the security is thus raised at night.
How it works:
First, put the paint into the thermal insulation bucket for melting, and then pour the melted liquid thermoplastic paint into the marking hopper and keep it in a flowing status.
When starting to draw the line, put the marking hopper on the road, leaving a certain gap between the marking hopper and the ground. When the marking machine moves straight forward at a constant speed, it will automatically delineate a neat marking line. The glass bead spreader can automatically and evenly spread a layer of reflective glass beads on the marking line.
Briefly, In terms of thermoplastic type machine, at first we need heating and mix the paint within the thermoplastic pre-heater, and then pour the paint into the paint tank of thermoplastic type device, than we can drive this machine to mark line. In terms of cold paint type machine, we needn't heat and mix the paint. Only put the paint into paint tank of cold paint type machine, than we can drive this machine to mark line.
Product Application:
These machines designed and manufactured by Jinan Junda Industrial Technology Co., Ltd. have been widely applied to many pavement construction. The quality of the construction reaches ISO standard. It contribute to improve the convenience and safety for avenues, streets, highway, etc.
Company Introduction:
Jinan JUNDA industrial technology was established in 2005.We are professional in designing, researching and developing, manufacturing and assembly, sales and technical services of road marking paint machine.
It is also a leader for the application and promotion of road marking paint machine.
JUNDA has established a perfect product system, mainly dealing with JUNDA road marking paint machine and accessories,also designing & producing customized products.
JUNDA has a long-term strategic partnership with world-renowned water jet cutting manufacturers to provide the most cost-effective water jet in the industry.
JUNDA road marking paint machines are with reliable product ISO 9001 quality and perfect after-sales service, JUNDA company has won the trust and praise from the vast number of users.
Welcome domestic and overseas customers for business cooperation and to make efforts of the prosperity and development of water jet industry.
Package:
wooden box which is suitable for sea shipping.
Certificate:
Our products have passed the certification of professional institutions, and the quality is trustworthy.
FAQ:
1.Q:Are you a factory or trading company?
A:We are factory which in this field for more than 10 years.
2.Q:How does your factory do regarding quality control?
A:Quality is priority. All staffs always attach great importance to quality controlling from the very beginning to the very end.Our factory has gained ISO 9001 and SGS authentication.
if any need, please contact us any time. We are glad to cooperate with you!!
Road marking machine, herein means the aggregate of hand-push type machine, self-propelled type machine, sitting type machine, thermoplastic type machine and cold painting type machine, which is used to mark lines on road. It is mainly used in car parks, avenues, streets, highway, etc. contributing to improve the convenience and safety of driving and walking.
){kind=link}
){kind=link}