Sea Garnet Sand 80#a+ for Water Jet Cutting Abrasive & Grinding Water Filtration Garnet Mineral

• Certification: ISO9001
• Fineness: Coarse
• Color: Red
• Type: Garnet Snad 80#a+
• Product Name: Garnet Sand 80#a+
• Imenite: 1-2%
• Model NO.: 80#A+
• Free Flow: 90% Minimum
• Certificate: ISO9001;SGS
• Moisture Content: Less Than 0.5%
• Chloride Content: 0.01%
• Specific Weight: 4.1g/cm3
• Average Bulk: 2.4G/Cm3
• Fracture: Sub-Conchoildal
• Free Silica: No
• Sample: Wthin 500g
• Crystal System: Cubic
• Metal Content: Traces
• Loss on Ignition: Nil
• Garnet(Almandite): 97%-98%
• Transport Package: 25kg Per Bag, Then40 Bags in One Ton Bag
• Specification: 80#A+
• Trademark: Honest Horse
• Origin: Jiangsu
• HS Code: 251320
• Production Capacity: 3000 Tons Per Month

Product Description

Abrasives Garnet Sand 80#a+ for Water Jet Cutting

1.Garnet Sand Application

  Faster Cutting - Crushed and selected from hard rock so that HONEST HORSE  waterjet grade garnet produces harder and sharper edges than other waterjet abrasives. These characteristics enable our garnet more like a hard and sharp cutting tool to finish a faster cutting.
 
Better Edge quality - According to the cutting material and edge quality requirement, there are various special and proper waterjet grades recommended that enable a better edge quality.
 
Less Dusty - HONEST HORSE  garnet has high garnet purity and very low dust. That makes the whole cutting course more smoothly. 
 
Choosing the Proper Mesh or Grade
HONEST HORSE offers various grades to match any focusing tube and orifice for any given cutting applications. Choosing the proper mesh, or grade, for the operation is very imperative. Different mesh sizes of garnet are designed to pass through different sized nozzles and choosing the wrong grade could be stop a waterjet operation completely. If the garnet grade is too large or coarse, the granules can jam inside a tube and cause a blockage. Too fine an abrasive have a tendency to "clump" together inside the cutting head and again, have the potential to clog. Or it may inhibit the flow of garnet in the feed tube and not consistently enter the venture of water flow between the jewel and nozzle. If you are not sure which mesh or grade is proper, feel free to contact us and we would like to give you our professional suggestions.



 

2.Garnet Sand Specification

Product	garnet sand
Specific Weight	4.1g/cm3
Average Bulk	2.4g/cm3
Crystal Systerm	Cubic
Fracture	Sub--Conchoidal
Al2 O3	16.60--18.10%
Fe2 O3	27.80--29.85%
Si O2	37.20--37.90%
Mg O	4.70--4.51%
Ca O	4.95--9.48%
Ti O2	2.5-3.1%
CHLORIDE CONTENT	Less than 25 ppm
SOLUBLE SALTS	Less than 100 ppm
PH OF AQUEOUS MEDIUM	6.93
Garnet (Almandite)	97-98%
Imenite	1-2%
Hardness	8.0(Mohs Scale)
Conductivity	Less than 25 Microsiemense per mete

 

3.Garnet Sand Production Technology
 

4.Garnet Sand Picture


 

 

5.Garnet Sand Certification and Testing







 

6.Garnet Sand Normal Packging
 

  1.25 kg per bag(pp bag or paper bag), then 40 bags in one ton bag.

  2.25 kg per bag(pp bag or paper bag), then 40 bags on one pallet.

  3.One ton one bag.

 

  All pakages are lined with waterpfoof materials.

  We can also pakage according to costomers' requirements.

 

 7.Service 

 

1. Sample Service

 

2. Customerized Service

 

3. After-sale Service

   
 

8.Company Profile

 

 Jinan Junda Indutrial Technology Co,.Ltd. is located in Jinan , Shandong Province, China,

which is the daughter cmpany of Honest Horse(CHINA) Holding Limited. We are the manuf-

-acturers of abrasives mediafor  15 years experience in north China.

 

   Our products include bearing steel grit , cast stel grit, steel shot, steel ct wire shot

 and garnet sand abrasives.They are widely used in sandblasting, stone gang saw

cutting,waterjet cutting, water filtration fields.

  
 

So far we have almost 15 years experience and our customers spread over 100 countries

around the worldthat distributein Asia, North America, South America and Austrilia, also

in Africa.

The products reach the ISO9001 standard,SAE and always enjoy a good reputation amony our customers. We welcome customers all over the world do cooperation with us.

 

10.FAQ

 Q.  What is the mode of your payment?

T/T: 50% advance payment and the rest 50% payment oay us when you get the scanned B/L from

our E-mail.

L/C:100% irrevocable L/C at sight.

 

Q. What's the MOQ of your product?

As usual MOQ is 5TONS.Or as your require, we need to calculate the new price to you.

 

Q. Can you provide the free samples?

Yes, we can send free samples less than 500g to you. Normally, we can send samples to customer

byexpress, such as DHL,TNT,Fedex,Aramex, etc.

 

Q. What atandars you carring out for your products?

SAE standard and ISO9001, SGS.