High Speed Easy Handling Sandblasting Gun for Heavy Industrial Coatings

• Customization: Available
• Application: Paint Spray Gun
• Warranty: 1year
• Model NO.: JDSG-4-1
• Brand Name: Blastany
• Machine Type: Sandblaster
• Video Outgoing-Inspection: Not Available
• Machinery Test Report: Not Available
• Marketing Type: Ordinary Product
• Warranty of Core Components: Not Available
• Core Components: Other
• Fuel: Electric
• Use: Container / Bottle Cleaning
• Cleaning Process: Abrasive
• Cleaning Type: High Pressure Cleaner
• Material: Glass / Ceramic
• Power: 0
• Weight: 28kgs
• Working Pressure: 0.5-0.8MPa
• Coating: Powder
• Certification: CE
• Method Type: Automatic
• Condition: New
• After-sales Service: Video Technical Support
• Type: Airless Spray Gun
• Transport Package: as Your Requirement
• Specification: Φ 380X700mm
• Trademark: JUNDA
• Origin: China
• HS Code: 8424200000
• Production Capacity: 1000 Sets /Month

Product Description

High speed Easy handling Sandblasting Gun for Heavy Industrial Coatings 

Application and features:
JD SG4 series pipeline inwall sandblaster is a special device supporting the use of sandblasting machine to clean the pipeline inwall. It can be used in manual work, also in automatic work if equipped with other devices. These series are suitable for the pre-treatment of coating pipeline inwall in the fields of oil, chemical industry and shipping. The degree of surface quality after the treatment is up to Sa2 and Sa3. These sandblasters can handle the pipelines whose ID ranges from φ60mm to φ800mm. They are convenient and safe to use and maintain easily.

item	value
Place of Origin	China
	Shandong
Brand Name	Junda
Condition	New
Machine Type	Sandblaster
Video outgoing-inspection	Not Available
Machinery Test Report	Not Available
Marketing Type	New Product 2020
Warranty of core components	1 Year
Core Components	Engine, Bearing, Gearbox, Motor, Pressure vessel, Gear
Fuel	Electric
Use	Container / Bottle Cleaning
Cleaning Process	abrasive
Cleaning Type	HIGH PRESSURE CLEANER
Material	Metal / Coil
Dimension(L*W*H)	380X700mm
Warranty	1 Year
Key Selling Points	Easy to Operate
Applicable Industries	Manufacturing Plant, Machinery Repair Shops, Retail, Construction works , Energy & Mining, Other
Showroom Location	None
Weight (KG)	28
Product name	Internal Pipe coater
Model	JDSG-4
size	380X700mm
Type	rotation type
Material	Tungsten Carbide/Boron Carbide
Certification	CE
After Warranty Service	Online support
Local Service Location	None
Working Pressure	0.5-0.8mpa
Air Consumption	10 m3/min

Working principle:
Forced by pressed air, the abrasives and air inside of sandblasting machine flow into sandblaster through
the blasting pipe. When flowing through the sandblaster, abrasives would be split-flow through two nozzles whose included angle is
130.With the recoil force of air, nozzle holder leads these two nozzles to spin to eject in all directions. Besides, sandblasters
can be moved along the pipe, so the work of entire cleaning pipeline inwall is done.
Operating principle:
When cleaning the inner wall of the pipe, it is necessary to configure a pressure feeding sandblasting machine and an air
compressor with enough air volume. The sandblasting hose of the sandblasting machine is connected with the inner wall cleaner of the pipe, and the manager is pushed into the top of the pipe to clean the work.
The equipment is the use of sand blasting machine pressure sent out of the air abrasive mixed flow, spray to the pipe inner wall cleaner cone nozzle, so that the abrasive guide to form a cone shape diffusion, so as to impact the pipe inner wall, to achieve the purpose of pipe inner wall cleaning.
Remark:
1). JD SG4 series is a special supporting device for JD pressure sandblasting machine. 2). Adjust the degree of tightness of outer joint can in a way adjust the spining speed of spining nozzle holder. And the speed should be controled within 30~500r/min. 3). If spining nozzle holder stops spining or spining too slowly, it may be because of underpressure, too tight outer joint, stuck bearings or jamed nozzle. Stop the machine, and then adjust and check. 4). Before working,pipeline inwall sandblaster should be put in the inwall from one side to another, and dry pressed air must be inlet. When working, blasting pipe should be pulled out slowly to make it get out at a constant speed. If the cleaning quality can't meet the requirements, work again to get the satisfactory effect. 5). If the abrasives are blocked and can not be spreyed out, it should be closed down first and exhuast, then have a check. 6). Quick-wear parts should be checked regularly,they should be replaced timely if worn, or they would have a bad influence on the efficiency and the blasting quality,and maybe bring accident.
 

Delivery

Company Introduction
Jinan Junda Industrial Technology Co.,Ltd has provided sandblasting abrasives and sand blasting equipment, spray paint&coating equipment for Sand Blasting, Surface Preparation and Corrosion Control in many different industries since the 2005's including Oil & Gas, Mining, Structural Steel Fabrication, Water Infrastructure, Marine and Bridge Refurbishment work throughout all over the world with our main hubs in Jinan city, Shandong province, China. SANDBLASTING EQUIPMENT From sandblasting cabinet, sandblasting pots, sandblasting hoses and nozzles to air conditioner in helmet , spray tips and even work gloves, we offer a complete line of superior products to help professionals stay comfortable and safe . Our abrasive sandblasting equipment is backed by our quality guarantee and we also offer maintenance, repaid, OEM &ODM to ensure your tools and supplies last longer and stay run.

Company Certificate

FAQ:

1. Are you a factory or trading company?
Jinan Junda Industrial Technology Co.,Ltd, established in 2005, is specialized in the development,manufacture, marketing and service-supplying of abrasives and sand blasting equipment, spare parts & protective tools. With its headquarter in Jinan city, Shandong province, Junda is becoming the leading enterprise in the field of metal surface finishing.

2. Can you provide ODM or OEM service?
We have complete lines for design and produce,we do many OEM and ODM service for our customers.

3. Can you provide samples?
We can provide paid samples.

4. What is the lead time for regular orders?
It depends on the order quantity and the season you place the order. The lead time is about 5-15 days.

5. what services can we provide?
Accepted Delivery Terms: FOB,CIF,FCA; Accepted Payment Currency:USD,EUR,JPY; Accepted Payment Type: T/T,L/C,Cash; Language Spoken:English,Chinese