|
Still deciding? Get samples of $ !
Order Sample
|
| Customization: | Available |
|---|---|
| Material: | 60mn; B2;B3; B4 |
| Content: | >90% |
| Shipping Cost: | Contact the supplier about freight and estimated delivery time. |
|---|
| Payment Methods: |
|
|---|---|
| Support payments in USD |
| Secure payments: | Every payment you make on Made-in-China.com is protected by the platform. |
|---|
| Refund policy: | Claim a refund if your order doesn't ship, is missing, or arrives with product issues. |
|---|
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
JUNDA manufactures forged steel balls ranging from φ20 mm to φ150 mm. The company uses high-quality round steel, low-carbon alloy, high manganese steel, and high-carbon high-manganese alloy steel as raw materials, processed through an air hammer forging process.
With advanced equipment, a unique heat treatment process, and a strict quality control system, JUNDA ensures superior performance of its forged steel balls:
Surface hardness: 58-65 HRC
Volume hardness: 56-64 HRC
Uniform hardness distribution
Impact toughness: 12 J/cm²
Crushing rate: far below 1%
Chemical composition:
Carbon: 0.4-0.85%
Manganese: 0.5-1.2%
Chromium: 0.05-1.2%
| Technical parameters of forging steel ball | ||||||||||||
| Inch | Size | T weight | Tolerance(mm) | Material | Surface hardness(HRC) | Volume hardness(HRC) | ||||||
| 3/4" | D20mm | 0.037+/-0.005 | 2+/-1 | B2 | 63-66 | 63-66 | ||||||
| 1" | D25mm | 0.072+/-0.01 | 2+/-1 | B2 | 63-66 | 63-66 | ||||||
| 11/4" | D30mm | 0.13+/-0.02 | 2+/-1 | B2 | 63-66 | 63-66 | ||||||
| 11/2" | D40mm | 0.30+/-0.04 | 2+/-1 | B2 | 62-66 | 62-66 | ||||||
| 2" | D50mm | 0.6+/-0.05 | 2+/-1 | B2 | 62-65 | 61-64 | ||||||
| 21/2" | D60mm | 1.0+/-0.05 | 2+/-1.5 | B2 | 62-65 | 60-62 | ||||||
| 21/2" | D65mm | 1.3+/-0.05 | 2+/-1.5 | B2 | 61-64 | 60-62 | ||||||
| 21/2" | D65mm | 1.3+/-0.05 | 2+/-1.5 | B3 | 61-63 | 60-62 | ||||||
| 3" | D75mm | 2.0+/-0.06 | 3+/-2 | B3 | 61-63 | 60-62 | ||||||
| 3"(Hot rolled) | D80mm | 2.0+/-0.06 | 3+/-2 | B3 | 60-63 | 60-62 | ||||||
| 3"(Forged) | D80mm | 2.1+/-0.06 | 3+/-2 | B3 | 60-62 | 53-57 | ||||||
| 31/2" | D90mm | 3.0+/-0.07 | 3+/-2 | B3 | 60-63 | 59-62 | ||||||
| 4" | D100mm | 4.1+/-0.15 | 3+/-2 | B3 | 60-63 | 59-62 | ||||||
| 4.5" | D115mm | 6.3+/-0.15 | 3+/-2 | B3 | 60-63 | 57-60 | ||||||
| 5" | D125mm | 8.1+/-0.3 | 3+/-2 | B3 | 59-62 | 55-60 | ||||||
| Chemical composition | C% | Si% | Mn% | Cr% | P% | S% | Ni% | |||||
| B2 | 0.72-1.03 | 0.15-0.35 | 0.3-1.2 | 0.2-0.6 | ≤0.035 | ≤0.035 | i≤0.25 | |||||
| B3 | 0.53-0.88 | 1.2-2.00 | 0.50-1.20 | 0.7-1.20 | ≤0.035 | ≤0.035 | i≤0.25 | |||||
Q. What is the mode of your payment?
T/T: 50% advance payment and the rest 50% payment oay us when you get the scanned
){kind=link}