Road Marking White Crystal Glass Beads for Sandblasting/ Abrasives

• Reflective Material Type: Reflective Glass Beads
• Material: Galss Beads
• Application: Thermoplastic Paint, /Road Marking Paint
• Shipping Cost: Estimated freight per unit.: about shipping cost and estimated delivery time.
• Currency: US$
• Return&refunds: You can apply for a refund up to 30 days after receipt of the products.
• Model NO.: 30#
• Color: Transparent
• Circularity: Round Rate 95%
• Durability: 3-5 %
• Density: 2.4-2.6g/cm3
• Size Distribution: Oversize 5% Under Size 10%
• Cao: >8%
• Refractive Index: ND1.5%
• Wire Diameter: 1-2mm
• Appearance: Round and Smooth
• Lead Content: No Lead Content
• Sio2: >72%
• Harmful Substances Content: Lower Than American 16CFR 1500 Standard
• Hardness: 6-7 Mohs ;46HRC
• Microhardness: 650kg/Cm3
• Fe2o3: 0.15%
• Flammable Fire Test: Not Easy Combustion
• Transport Package: 25kg/Bag, 40 Bags Put in 1 Ton (2200lbs) Bag
• Specification: 20-40#
• Trademark: Junda
• Origin: China
• HS Code: 70182000
• Production Capacity: 3000tons/Month

Product Description

Road Marking White Crystal Glass Beads for Sandblasting/ Abrasives

I. Premixed microspheres; mixed in paint before working
II. Drop on microspheres.
Special coated glass microspheres / beads, brighter and better in moisture proof. It is used by dropping / spraying after mark painting. The coating will increase durableness for glass microspheres / beads and better function in rainy days and moist regions.

1.Glass Beads 

Glass beads are usually flame flotation method, the flame float method is a secondary molding method, the basic principle of flame flotation method is to break the waste glass into a certain size of the particles, and in a certain way to the glass particles into the flame, In the role of the flame, the glass particles soften, melting,molding, annealing then become glass beads.


2.Glass Beads Specification
 

Project		Quality
Chemical composition%	SiO2	>72%
	CaO	>8%
	Na2O	<14%
	MgO	>2.5%
	Al2O3	0.5-2.0%
	Fe2O3	0.15%
	Others	2.0%
Refractive Index		Nd≥1.5%
Density		2.4-2.6g/cm3
Size distribution		Oversize ≤5% under size ≤10%
Wire diameter		0.03-0.4mm
Durability		3-5 %
Hardness		6-7 MOHS ;46HRC
Microhardness		≥650kg/cm3
Circularity		Round rate of ≥95%
Appearance		colorless ,glass transparent without impurities,Round and smooth
Application		1.Grinding 2.Road marking paint 3.Sand blasting
Lead Content		No lead content, reach American 16CFR 1303 Lead content standard
Harmful substances content		Lower than American 16CFR 1500 standard
Flammable fire test		Not easy combustion,reach American 16CFR 1500.44 standard
Soluble heavy metal content		Metal content of soluble matter ratio solid weight rate no more than ASTM F963 corresponding value
Package		25KG/pp bag then 40 bags in one ton bag/pallet

3.Glass Beads Procedure

A.raw materials
All raw materials are qualified products with product testing reports. 

B. molding 
In the production process, molding is the key of product quality . On the furnace temperature control, the number of units and raw materials scattered uniformity, the introduction of wind and other equipment in strict accordance with the operating procedures.

C.annealing
annealing is the necessary way to improve the strength of the product, the temperature is critical. We strictly according to set temperature, the annealing speed can not be fast, nor slow, to ensure the timeliness of the annealing process.

D.test 
We use advanced detection equipment, to control the step quality , substandard products can not be stored. 
All the product reach international standard , like European EN1423 and 1424, the United States AASHTO M247, the British BS6088, Japan JIS R3301, South Korea KS L2521 and other requirements.


4.Glass Beads with chinese standard size 

 

Type	Mesh	Micronsm Max(μm)	Microns Min(μm)
30#	20-40	850	425
40#	30-40	600	425
60#	40-60	425	300
80#	60-100	300	150
100#	70-140	212	106
120#	100-140	150	106
150#	100-200	150	75
180#	140-200	106	75
220#	140-270	106	53
280#	200-325	75	45
320#	>325	45	25

5.Application

Reflective glass microspheres / beads, as a necessary material for road marking, are mainly used for road mark lines and traffic signs. It is usually classified as bellows according to its usages.









6.Glass Beads Normal Packing 

1. 25kg per bag(pp bag or paper bag), then 40 bags put in a 1000kg (2200lb) bulk bag.
2. 25 kg per bag(pp bag or paper bag), then 40 bags shrink wrapped onto a 1000kg (2200lb) pallet.
3. 25 kg per bag(pp bag or paper bag), then 40 bags in one box.
4. One ton loose in one ton bulk bag.
5. All pakages are lined with waterproof materials.
6. Gnerally, one 20GP container can load 25 tons, 27 tons at most. 

We can also pakage according to costomers' requirements.





7.Company Profile

 Jinan Junda Indutrial Technology Co,.Ltd. is located in Jinan , Shandong Province, China, which is the daughter cmpany of Honest Horse(CHINA) Holding Limited. We are the manufacturers of abrasives mediafor more than 15 years experience in north China.

Our products include bearing steel grit, cast stel grit, steel shot, steel ct wire shot and garnet sand abrasives.

They are widely used in sandblasting, stone gang saw cutting, waterjet cutting, water filtration fields.





8.FAQ

Q1 What is the mode of your payment?
T/T: 50% advance payment and the rest 50% payment oay us when you get the scanned
B/L from our E-mail.
L/C:100% irrevocable L/C at sight.

Q2 What's the MOQ of your product?
As usual MOQ is 1TON. Or as your require, we need to calculate the new price to you.

Q3 Can you provide the free samples?
Yes, we can send free samples less than 500g to you. Normally, we can send samples
to customer by express, such as DHL,TNT,Fedex,Aramex, etc.
 
Q4 Delivery time?
  3-5 work days for one container after get the advance payment 

Q5 Advantages?
  15 years exprierence
  SAE, ISO9001 certificate, SGS certificate
  Support after-sale service


9.SSPC show



10.Our team



We are waiting for your contact !